E6000 Spray Adhesive 118.2ml - Clear

E6000 Spray Adhesive is a permanent, multi-purpose latex-based spray applied adhesive without the toxic smells, fumes or unhealthy side effects. It works great for surface area applications and adhering/mounting lightweight materials.

• NO toxic smells/fumes or unhealthy side effects from using E6000 Spray Adhesive. No more strong odor, headaches, coughing, dizziness, etc.
• Clean-up is a breeze – Just use water. No more sticky mess.
• Use for all kinds of projects! Anything from home repairs, to crafting, for hobby/school or office projects, to décor, scrapbooking, photos & framing, to scenery building and much more!
• Use on paper, wood, poster board, cardboard, photos, foil, medium to heavy-weight fabrics, vinyl, upholstery batting, foams, Styrofoam®, glass, felt, plastic, rubber, leather, metals & more!
• Lab testing results prove that E6000 Spray Adhesive forms a stronger bond on most materials used around the home, at work and by crafters.
• Strong, flexible, permanent bond. Resists water. Won’t yellow. Can be used indoors or outdoors.
• When used as recommended, this latex-based adhesive isn’t harmful to people or the environment. The product contains VERY LOW VOCs, has NO harsh chemicals, is CARB compliant, requires NO Prop 65 warnings and uses no propellants or solvents. It is an OUTSTANDING solution for your spray adhesive needs.
• The lignin-free formula has a low pH, making it great to use on photographs.
• Pumps out in a fine, even spray mist that is solvent & propellant-free.
• Resists bleed-through – unless the consumer intentionally saturates the substrate for unique projects. Once dry, the adhesive helps form a barrier that helps protect material.
• Dries to a translucent “colour” that is virtually invisible when dry.

• Colour: Clear
• Size: 118.2ml

Always test a small area before full use.

1. Turn upside down and SHAKE VIGOROUSLY before using.
2. Protect surrounding area from overspray.
3. Point spray tip away from face.
4. Hold bottle 8-10 inches away from surface.
5. PAPER, PHOTOS, CARDBOARD & FOIL: Spray a thin, light coat to one surface. Join materials and continue to apply pressure periodically making sure to secure corners. Allow to dry 1-3 minutes. POROUS MATERIALS (including foams and Styrofoam™): Spray a heavy coat to both surfaces to be joined. Mate surfaces together. Allow to dry.* NON-POROUS MATERIALS: Spray a light coat to one surface. Mate surfaces together. Allow to dry.*
6. IMPORTANT – CLEAN AFTER EACH USE: To prevent clogging, remove and rinse nozzle/straw. Pump warm tap water through sprayer, until all adhesive is cleared out. Then dry, replace in the bottle, secure cap.
7. KEEP FROM FREEZING

• E6000 Spray Adhesive 118.2ml - Clear (1 pc)

Maximum strength may not be reached for 1-5 hours. Styrofoam® may require an overnight cure. Not recommended for use on Vellum